Description

Blumat Tropf-Blumat 2-Pack Contents 2 Pieces with Drip Hose and T-Piece

2-Pack Tropf-Blumat irrigation sensors with 25cm drip hose and Ø8mm T-piece for expansion of an existing installation.

The Tropf-Blumat is the central component of the Blumat system: it controls the moisture level by simultaneously functioning as a moisture sensor, valve, and dripper.

This sensor is filled with water and measures the moisture content in the root ball. If the root ball dries out, the membrane at the top of the sensor opens, and water is supplied again until the set moisture level is restored.

The water supply comes from a water tank or directly from the water mains via a pressure-reducing valve.

A Tropf-Blumat irrigation system can be expanded at any time with additional sensors. Even very large systems are possible, with up to 500 irrigation sensors connectable to a single pressure reducer.

How Tropf-Blumat Works
The Tropf-Blumat works automatically. When the soil becomes dry, suction power activates the irrigation process. The built-in membrane in the Tropf-Blumat opens and allows water to flow. Once the soil is sufficiently moistened, it autonomously stops the water supply. Each Tropf-Blumat is both a sensor and an irrigation unit. It automatically and independently detects the moisture content of the surrounding soil and thus regulates the water release.

Contents of 2-Pack
2 x Tropf-Blumat incl. drip hose + T-piece